
BIOS Commands 4-7
Version 2.0 Copyright © 2006 by LSI Logic Corporation. All rights reserved.
4.4.5 Display Adapter Time
Use the command in Ta ble 4 . 5 to display the current time and date of the
selected adapter.
4.4.6 Set Factory Defaults
Use the command in Table 4. 7 to set the factory defaults on the selected
adapter(s).
4.5 BIOS Commands
You can use the commands in this section to select the settings for
BIOS-related options.
4.5.1 Set or Display Bootable Logical Drive ID
Use the command in Table 4 . 8 to set or display the ID of the bootable
logical drive.
Note
: This option does not write a boot sector to the logical drive.
The operating system will not load if the boot sector is
incorrect.
Table 4.6 Display Adapter Time
Syntax CmdTool –AdpGetTime -aN
Description Displays the selected adapter’s time in yyyymmdd HH:mm:ss format.
Table 4.7 Set Factory Defaults
Syntax CmdTool -AdpFacDefSet -aN|-a0,1,2|-aALL
Description Sets the factory defaults on the selected adapter(s). You cannot set the factory
defaults if the adapter already has a configuration defined on it.
Table 4.8 Bootable Logical Drive ID
Syntax CmdTool –AdpBootDrive {-Set –LDID} | -Get -aN|-a0,1,2|-aALL
Description • -Set: Sets the logical drive as bootable so that during the next reboot, the BIOS
will look for a boot sector in the specified logical drive.
• -Get: Displays the bootable logical drive ID.
Komentáře k této Příručce